The salt necessary for its operation should be added only once to the pool in a concentration of 4-6 g./l (6 times lower than that of seawater) and similar to a physiological serum.

Electrolysis equipment constantly generates the level of chlorine required.

All you need to do is readjust the salt level in the pool from time to time.

From the Touch control area, the amount of chlorine generated can be adjusted.

The level of chlorine required for a pool is too high for a spa, so the salt chlorinator would simply stop or need to be disconnected to prevent it from producing too much chlorine.

The SaltExpert range has an intelligent controller that allows the level of chlorine generated to automatically lower to the appropriate level for a spa, and all, just by pressing a button.

At intervals determined by the intelligent software included in the device, SaltExpert devices reverse the polarity of their electrodes. This self-cleaning process removes any existing residue on the plates, increasing the life of the cell and eliminating any type of maintenance.