Vesubio sand filter 22.000 l / h 750 mm outlets 2"
The Vesubio filter range is wide to reach both the public swimming pool and the private swimming pool sector.
Filters manufactured with simultaneous projection of resin and fiberglass.
Threaded cap with heavy duty screws. 210 mm upper mouth.
The 1050mm and 1200mm models are also available with a 400mm top mouth.
Maximum pressure of 2.5 kg / cm2.
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
A filter is an important part of a swimming pool filtration system. Thanks to its filtering load (silica sand or glass) it retains particles up to 20 microns smaller than its size. Reinforced plastic or fiberglass and polyester filters are designed to withstand static and dynamic pressures.
Filtration is one of the three parts of the work that must be done to keep the pool water clean, it also requires a disinfection treatment and PH control. For a correct use of the sand filter, it is important to wash it. Since the sand in the filter will have been clogged due to dirt. Therefore, the same filter has a selector valve with which we can carry out a backwash, which allows the water circulation to go in the opposite direction in the wound sand filter. For any operation related to manipulating the selector valve, it is important to turn off the filtration pump. The filtration cycle normally takes 4-6 hours to complete with all the pool water.
- Side Valve
- Type of Use
- private pool
- 22000 l/h
- Pool Size
- Maximum Pressure
- 2.5 bar
- Filter Type
- Sand, Glass
No customer reviews for the moment.