

Laminated sand filter, reinforced with high performance polyester resin and fiberglass.
Filter bed height from 545 mm to 785 mm depending on the diameter.
Six-way side selector valve for filtration, washing, rinsing, recirculation, emptying and closing operations.
Lid without quick opening and closing screws.
Maximum working pressure: 2.5 kg / cm2.
1 "collector arms
Red color.
Polypropylene foot.
Security policy
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
By means of the patented system of opening and closing of the lid, the traditional screws are eliminated. As a result, a uniform pressure is exerted over the entire section of the sealing gasket and the operation of opening the lid is facilitated.
A filter is an important part of a swimming pool filtration system. Thanks to its filtering load (silica sand or glass) it retains particles up to 20 microns smaller than its size. Reinforced plastic or fiberglass and polyester filters are designed to withstand static and dynamic pressures.
Filtration is one of the three parts of the work that must be done to keep the pool water clean, it also requires a disinfection treatment and PH control. For a correct use of the sand filter it is important to wash it. The sand in the filter will have become clogged due to dirt. Therefore, the same filter has a selector valve with which we can carry out a backwash, which allows the water circulation to go in the opposite direction in the sand filter. For any operation related to manipulating the selector valve, it is important to turn off the filtration pump. The filtration cycle normally takes between 4-6 Hours to complete with all the pool water.
Data sheet
No customer reviews for the moment.